3/5-Axis Full Servo Robot Provider Offers 3-Axis Full Servo Robot, 5-Axis Full Servo Robot, Travel (Up and Down) 700-900mm, for Machines from 80 to 380 Ton.
Runma 700-900 Series traversing robot arm is applicable to all types of horizontal injection machine ranging from 80 to 350 ton for products and sprues take-out.
Single stage or telescopic type vertical arm, with product arm and runner arm, for two plate or three plate mold products take out.
X-, Y-, Z-axis are driven by AC servo motor, can realize products stacking up on any points inside the mold, as well as at X, Y, Z directions, can cut the runner by scissors driven and inset or embed the accessory by the cylinder.
| Model | A | B | C | D | E | F | G | H | I | J | K | L |
| RQ-700ID(S3, S5) | 1550 | \ | 500 | 1510 | 180 | 200 | 200 | 145 | 830 | 420 | 1250 | 2010 |
| RQ-800ID(S3, S5) | 1610 | 1510 | 1400 | 2190 | ||||||||
| RQ-900ID(S3, S5) | 1730 | 1630 | 890 | 1550 | 2310 |
| Model | Applied to injection molding machine (ton) | Travel (mm) | Side posture angle (degree) | Max load (including fixture) | Time (sec) | Driven way | Working pressure (kgf/cm2) | Air consumption (nl/cycle) | Power | Power consumption | NW (kg) | |||
| up and down | pull out | cross traveling | take-out | empty loop | ||||||||||
| RQ-700ID(S3, S5) | 80-220 | 700 | 140-830 | 1250 | 90 | 5 | 1.3 | 6 | x, y, z AC servo motor | 5-7 | 8 | AC220±10V 50/60HZ | 2.8 | 180 |
| RQ-800ID(S3, S5) | 180-320 | 800 | 140-830 | 1400 | 1.4 | 6.5 | 190 | |||||||
| RQ-900ID(S3, S5) | 260-380 | 900 | 140-890 | 1550 | 1.5 | 7.5 | 200 |
