When compressor is in operation, the outlet of compressor always has lots of refrigerant oil. We need to install an oil separator between compressor and condenser to separate the refrigerant oil and refrigerants in order to prevent the compressor not lose too much refrigerant oil and prevent the refrigerant oil flow to system with refrigerants to interfere the condenser’s heat function and evaporator cooling function. Then the oil will flow back to the compressor crankcase. Oil-return device operates on the ball valve moving on the bottom of oil separator and the high-low voltage theory. The oil separator can ensure the sufficiency of oil in compressor and let the compressor reach its best cooling performance.
●可靠的针形阀关闭系统
Reliable needle valve closing system
●带有钢制回油系统的密封结构(1/ 4"或3/ 8"螺口)
Steel oil return system with hermetic welded construction(1/4\'\'or3/8\'\'SAE connectors)
●减小系统高压端的振动和噪声】
Can reduce the vibration and noise of system high pressure end
产品说明 Specifications
● 储油量：55824-559011为600ml，56909-569417为800ml
Oil volume 55824-559011:600ml, 56909-569417:800ml
●在安装油分离器之前，需先对油分离器进行初始充油，从而保证系统正常运行
We need to pre-charge the oil before installing oil separator.
