| 品牌 | 安普 | 型号 | 1427071-6 |
| 类型 | 六类线/CAT6 | 屏蔽层 | 非屏蔽双绞线 |
| 线芯材质 | 裸铜线 | 护套材质 | PVC |
| 纤芯绞合方式 | 对绞 | 传输速率 | 1000Kpbs |
| 抗拉强度 | 30N | 芯数 | 8 |
| 使用温度 | 0-60℃ | 储存温度 | -20-60℃ |
| 抗压强度 | 35N | 适用范围 | 布线，弱电，机房，装饰装修 |
| 产品认证 | UL | 加工定制 | 否 |
| 产地 | 江苏 | 厂家 | 安普 |
| 304.8 m | 1000 ft | |
| Diameter Over Conductor | 0.978 mm | 0.0385 in |
| Diameter Over Jacket, nominal | 5.588 mm | 0.22 in |
| Conductor Gauge, singles | 24 AWG |
Electrical Specifications
| Characteristic Impedance | 100 ohm |
| dc Resistance Unbalance, maximum | 5 % |
| dc Resistance, maximum | 9.38 ohms/100 m | 2.859 ohms/100 ft |
| Delay Skew, maximum | 45 ns |
| Dielectric Strength, minimum | 1500 Vac | 2500 Vdc |
| Mutual Capacitance at Frequency | 5.6 nF/100 m @ 1 kHz |
| Nominal Velocity of Propagation (NVP) | 68 % |
| Operating Frequency, maximum | 250 MHz |
| Operating Voltage, maximum | 80 V |
| Propagation Delay, maximum | 536 ns/100m @250MHz |
| Remote Powering | Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A |
Electrical Cable PerformanceCSCommScopeStdRefers to the standard value listed under Transmission Standards in the Electrical Specifications aboveTypTypicalILInsertion Loss (dB/100m)NEXTNear End Crosstalk (dB/100m)ACRAttenuation to Crosstalk Ratio (dB/100m))PSNEXTPower Sum Near End Crosstalk (db/100m)PSACRPower Sum Attenuation to Crosstalk Ratio (dB/100m)ACRFAttenuation to Crosstalk Ratio - Far End (dB/100m)
