深圳市欧锐浦科技有限公司成立于2011年11月24日,注册地位于深圳市宝安区石岩街道石新社区塘头大道196号B座13楼-12,法定代表人为杨永州。经营范围包括发光二极管原材料、LED电子产品、LED照明系列产品、LED广告展示产品、光学产品、电子产品、电子元器件的技术开发及销售；国内贸易,货物及技术进出口。(以上均不含再生资源回收经营及法律、行政法规或者决定禁止和规定在登记前须经批准的项目)
5050三色发光二极管灯珠
5050三色燈珠l50RGB波长亮度顏色搭配可以按要求定制,詳情請咨詢我司業務代表！本產品采用台湾制程，ASM生产设备,整合全球优质产品。
区别发光二极管灯珠的方法如下：
1、看亮度,即在350毫安的驱动电流,电压在3.0-3.6V之间的时候的亮度是多少,越高越好。
2、看芯片品牌及大小,品牌有日亚、CREE、普瑞、旭明、晶元、新世纪等,越靠前越好,芯片越大越好。
3，看BIN，也就是色温分区和电压BIN，越细越好。
4, look at the attenuation, you need to do aging test, the smaller the light attenuation, the better.
5. Look at the actual application. If there are suitable and cheap lenses and aluminum substrates in the market, it will be fine. If the lenses and aluminum substrates need to be opened, they will be put into larger amounts, with 1W high power, current: 350ma, voltage: 2.8-4.0V, brightness: 80-130LM, color temperature: 3000-12000K K.
No matter what LED lamp bead products are used outdoors, they are faced with waterproof and moisture-proof sealing problems, which will directly affect the service life of LED products if they are not handled well. At present, a small number of manufacturers with high requirements on product quality adopt the traditional epoxy resin "pouring" method to seal LED products, which is troublesome to operate, not suitable for large LED lamp bead products, and will also increase the weight of products.
LED lamp beads have unique advantages, but LED lamp beads are fragile semiconductor products, so we should be extra careful when using LED products, and please attach great importance to them in the process of use.
Shenzhen Ouruipu Technology Co., Ltd. strictly carries out quality management, introduces advanced equipment in time, strengthens management, increases investment, bases itself on the local area, looks to the future, develops steadily, and constantly moves towards the whole country, and is committed to providing reliable and trusted products and services to the public.