深圳市欧瑞普科技有限公司成立于2011年11月24日，注册地为深圳市宝安区石岩街道塘头大道196号B座13楼-12楼，法定代表人为杨永洲。经营范围包括LED原材料、LED电子产品、LED照明系列产品、LED广告展示产品、光学产品、电子产品、电子元器件的技术开发和销售；国内贸易，货物和技术的进出口。(以上均不包括法律、行政法规或决定禁止并要求登记前须经批准的再生资源回收及项目。)
一些厂商为了降低产品成本，采用“阻容降压”的方式给LED产品供电，这将直接影响LED灯珠的使用寿命。用开关电源(恒流源)给LED灯珠产品供电，不会影响产品的使用寿命，但是产品成本比较高。
5050灯珠RGB系列
The power of 0.2w-1.5w has good color mixing consistency, and the red light adopts double-line mode to improve product quality;
PPA adopts Japanese raw materials+technology, and the moisture-proof effect is the same as that of peer manufacturers, and the moisture-proof grade is MSL2a；;
Some anti-static measures should be taken during the production of LED lamp beads, such as grounding the workbench, wearing anti-static clothing for workers, wearing anti-wrist strap, and wearing anti-static gloves. If possible, an anti-static ion fan can be installed, and at the same time, the humidity in the workshop should be kept at about 65%, so as to prevent the air from being too dry to generate static electricity, especially the green LED lamp beads are relatively more likely to be damaged by static electricity. In addition, the antistatic ability of LEDs with different quality grades is different, and the antistatic ability of LED beads with high quality grades is stronger.
区分LED灯珠的方法如下:
1.看亮度，即驱动电流为350mA，电压在3.0-3.6v之间时的亮度是多少，亮度越高越好。
2.看芯片的品牌和大小。品牌有日亚、科锐、普瑞、徐明、晶源、新世纪等。正面更好，芯片越大越好。
3，看BIN，也就是色温分区和电压BIN，越细越好。
4、看衰减，需要做老化测试，光衰减越小越好。
5.看实际应用。如果市面上有合适又便宜的镜片和铝基板就好了。镜头和铝基板需要开的话会放更大的量，1W大功率，电流:350ma，电压:2.8-4.0V，亮度:80-130LM，色温:3000-12000K K。
深圳市欧瑞普科技有限公司严格执行质量管理，及时引进先进设备，加强管理，加大投入，立足本地，放眼未来，稳步发展，不断走向全国，致力于为大众提供值得信赖的产品和服务。