哈威VP 1 Z-1/4-A 24换向阀德国受教育妇女荣誉协会(Honorary Association for Women in Education)液压阀是锥形座阀,有电磁铁,液压,气动和手动操纵等方式,由于其内部压力补偿,冬油口可承受的压力相等。当不工作时,弹簧复位的阀会自动回复至零位或中位。定位形式的阀,通过给对面布置的各电磁铁线圈通以短脉冲信号来达到零位或工作位置。
哈维VP 1 Z-1/4-A 24方向控制阀2/2通和3/2通方向控制阀可以直接在阀体上安装压力继电器或压力表。此外，4/3通致动器油口A和B也可以通过信号油口(G1/8)安装压力继电器或压力表。内压平衡可实现任意方向的循环，可防止因介质温度高而导致胶水粘电枢。因为控制部分和介质是隔离的，所以不需要担心控制元件和介质之间的相互作用。
The operating mechanism of the HAWE directional control valve VP 1 Z-1/4-A 24 is not in contact with the hydraulic medium, which can prevent the interaction between the control parts and the pressure medium. The phenomenon that the functional components get stuck in the movement due to the viscosity change of the medium caused by heat will not happen here. HAWE reversing valve is mainly used in hydraulic lubrication system with grease or high viscosity oil as medium. If it is suitable for the corresponding sealing material, it can also use the corresponding medium.
Model recommendation:
VP1R-1/4-A24
VP1R-3/8-G24
VP1R-A24
VP1R-G24
VP1W-G24
WN 1 D-G24
CDK 3-2
CDK 3-5
CDK 3-5-95
CMV2C-250