Structure of cooling tower 1. wgfb non-packing spray cooling tower adopts high-efficiency and low-pressure centrifugal atomization device (nozzle pressure: 0.035mpa) as cooling element, which replaces the packing and water distribution device of traditional packed tower, making the whole tower almost an empty tower and greatly simplifying the structure. 2. In wgfb no-packing spray cooling tower, after the packing and water distribution devices are cancelled, the atomizing device is installed above the air inlet duct, and the spraying direction of water is the same as the cold air sucked by the axial fan. At the same time, water has two processes: rising and falling, and cooling also has two processes: downstream cooling and countercurrent cooling. 3. gfn packing-free spray cooling tower sprays water into a mist by an atomizing device, so that the tiny particles of air and water are in uniform contact, 而填料塔通过水分配喷嘴将水分配到填料上，以薄膜形式接触冷空气。
冷却塔喷嘴:DC喷嘴、反光喷嘴、花兰喷嘴、冷却塔喷嘴、均匀飞溅喷嘴、多层喷嘴、tp11喷嘴、哈蒙喷嘴、xpz喷嘴、电厂专用冷却塔喷嘴、xph喷嘴、耙式喷嘴、三盘冷却塔喷嘴、填料塔喷嘴、喷雾喷嘴和方形塔喷嘴。
